Enter Data Here
|
PLEASE READ THIS IMPORTANT INFORMATION
Be sure to set your desired volume to either gallons or liters.
This Titration calculator is set to default to 22% Methanol and 5% Lye for base amounts.
These
ratios’s are for the worst case Titration result. If your
titration is above 3.0 then leave these settings. If you are in the 2.0
range, we suggest lowering the Methanol percentage to 20% and the Lye
percentage to 3.5. If your titration is below 2.0 than 18% methanol is
usually ok to use and you can try lowering the Lye to 3.25 or so. We
recommend not to exceed the default ratios as well as not to go below
12% methanol and 2.8 on the Lye.
We have been
successful with all these ranges and the end result is yours. If you do
not feel comfortable with this then just set the Methanol percentage to
20% and the Lye to 3.5. This is the most common setting and you should
see a reaction every time.
The recipe is given in liters, gallons, ounces and grams. Be sure to
read the grams for the calculated amount of Lye required as well as the
correct amount of Methanol
(Gallons or Liters). If you still have questions please feel free to call us direct.
Good Luck and Happy Bio-Diesel eXtracting! |